Ignition Barrel Replacement Cost
An ignition barrel replacement with AutoVault costs from £150. The new barrel is built to your existing key, so one key still runs the car. The fault and the make set the exact figure.
Quotes for the same barrel can sit hundreds of pounds apart. Most of that gap comes from two choices made before the work starts. The first is whether the barrel is rebuilt or replaced. The second is whether your key is kept or the whole lock set is changed.
- Barrel rebuilt to your key, worn wafers£150
- New barrel built to your key, seized or damaged£150
- Mercedes electronic steering lock£220
- Key cut to code if the old one is too worn, car£145
- Key cut to code if the old one is too worn, van£155
These are AutoVault starting prices with no callout fee. The make, the model and the fault set the final figure, which is confirmed from the registration before the van sets off.
Key stiff or not turning?
Send the registration and what the key is doing, and the price comes back before the van leaves.
What Changes the Price of an Ignition Barrel Replacement?
Six things move the figure, and the first two decide most of it.
Repair or full replacement
Most worn barrels fail at the wafer tumblers inside, not the housing. New wafers rebuild the barrel to turn smoothly with your key, while a seized or cracked barrel needs a new one. With AutoVault both start from £150, so the fault decides the job rather than the price.
Keeping your key or changing the lock set
A new barrel matched to your current key leaves you with one key for the doors and the ignition. A barrel or lock set supplied with its own keys adds new keys to cut and program, which is where many higher quotes come from.
The make and the lock design
A traditional barrel is plain mechanical work. Some Volkswagen group cars use a combined ignition and steering lock module that also needs an electronic reset, some BMW models build the ignition into the steering column, and some Mercedes cars use an electronic steering lock that is repaired on its own from £220.
A barrel that has seized
A barrel that will not turn at all has to come out without damage to the steering column or the lock housing. The starting price stays the same, but the job takes longer than on a barrel that still turns.
Where the work is done
A dealer usually needs the car in the workshop, which can mean a recovery truck when the key will not turn. A mobile auto locksmith does the work where the car stands, with no callout fee on top.
Coding after the work
On some cars the immobiliser needs the key coding again once the new barrel is in. That step is part of the job at the car, not a second visit.
Should You Repair or Replace an Ignition Barrel?
Repair when the housing is sound and only the wafers are worn, and replace when the barrel has seized, cracked or been forced. The table matches the common faults to the right job.
| What the key does | Likely cause | The right job | From |
|---|---|---|---|
| Turns stiffly or needs wiggling | Worn wafers | Rebuild the barrel to your key | £150 |
| Will not turn at all | Seized or damaged barrel | New barrel matched to your key | £150 |
| Works only with the spare | Worn key, not the barrel | New key cut to code | £145 |
| Turns but the car will not start | Ignition switch or immobiliser | Not a barrel job, the chip or switch is checked | Set after the check |
| Wheel stays locked on a Mercedes | Electronic steering lock | Steering lock repair | £220 |
Rebuilding first keeps the original housing and the original key, and a replacement ignition barrel is only fitted when the old one cannot be saved.
Ignition Barrel Costs by Make
The starting price is the same on most makes, because the barrel is built to your key at the car. What changes from one make to the next is the lock design and how long the work takes.
| Make | What is different | From |
|---|---|---|
| Ford Transit and Transit Custom | High mileage wears the wafers fast, and 2000 to 2014 barrels seize most often | £150 |
| Vauxhall Astra, Corsa and Vivaro | Worn wafers at higher mileage, straightforward to rebuild or replace | £150 |
| Volkswagen, Audi, SEAT and Skoda | Some models from the mid 2000s pair the ignition with the steering lock in one module | £150 |
| BMW | Some models build the ignition into the steering column, and the key may need coding again | £150 |
| Land Rover and Jaguar | Older Discovery and Range Rover barrels are standard work, newer keyless models need module checks | £150 |
| Mercedes Sprinter and Vito | Barrel wear is common on the vans | £150 |
| Mercedes cars with an electronic lock | The steering lock fails on its own and is repaired at module level | £220 |
Every figure is a starting price for a barrel built to your existing key, confirmed from the registration first.
Mobile Locksmith, Main Dealer or Doing It Yourself?
A mobile auto locksmith is the cheapest route that keeps your key, a dealer is the slowest, and a part fitted yourself rarely saves money once the keys are counted.
| Route | What you get | The catch |
|---|---|---|
| Mobile auto locksmith | Barrel rebuilt or replaced at the car, built to your key | Mercedes cars with FBS4 from 2015 go to a Mercedes dealer for keys |
| Main dealer | Genuine parts, often a full lock set | Car taken in, new keys to program, often several hundred pounds more |
| Part bought and fitted yourself | A barrel with its own uncoded keys | Two keys to carry, and coding still needed on many cars |
Most barrel jobs take 30 to 60 minutes at the car or van, so a mobile visit also saves the days a dealer booking can take.
How Can You Keep an Ignition Barrel Repair Cheap?
- Try the spare key firstIf the spare turns smoothly, the worn part is the key, and a new key costs less than barrel work.
- Act while the key still turnsA stiff barrel can be rebuilt to your key, while a barrel left until it seizes may strand the car away from home.
- Keep your existing keyAsk for the barrel to be built to your key, so no new keys have to be cut and programmed.
- Take weight off the keyringA heavy bunch of keys hanging from the ignition pulls on the wafers every time the car moves.
- Get the price from the registrationThe make and the model year tell the locksmith which barrel and which parts are needed before the visit.
What Does an Ignition Barrel Cost in Staffordshire?
The prices on this page are the prices AutoVault charges across Staffordshire, from the base in Uttoxeter, about 25 to 45 minutes from most towns, with no callout fee and the figure confirmed from the registration before the van sets off.
Volkswagen group cars
Golf, Polo, A3, Leon and Octavia barrels have their own guide to VW, Audi and Skoda ignition barrels, covering the combined module and its reset.
Keys as well as the barrel
When the key itself is lost or worn out, the prices for every key type are set out in Car Key Replacement Cost in the UK.
Ignition Barrel Cost Questions Answered
Ignition barrel trouble in Staffordshire?
Call with the registration and what the key is doing, and the price is confirmed before the van sets off, with no callout fee.